Phone: +34 93 223 86 30
Productos
Roll over image to zoom in
Click to open expanded view

SCORPIO 30+7′

In stock

Telescopic crane with 9 m / 30 ‘arm length with option of 2 m / 7′ arm extension to reach 11 m / 37 ‘starting from the same size with the arm closed.

Category:

Presentation

Telescopic crane with 9 m / 30 ‘arm length with option of 2 m / 7’ arm extension to reach 11 m / 37 ‘starting from the same size with the arm closed.

It consists of 3 telescopic arms that are pushed by the previous one by means of two independent lateral cables, allowing twice the security, greater precision in the movement and less need to adjust the tension in the cables themselves.

Its Scorpio electronics allow functions such as memorization, arc compensation, generation of movements or sequential limits in addition to the more frequent ones such as speed controls, damping or limits.

And all this minimizing noise and achieving a smooth exit movement of the arms.

Technical specifications

TECHNICAL SPECIFICATIONS

Maximum length: 9m/30′
Maximum length with extension: 11m/37′
Minimum length on both versions 30′ and 37′: 2.25m/8′
Rear length of the arm on both versions 30′ and 37′: 2.40m/7′
Telescopic range version 30′: 7m/21′
Telescopic range version 37′: 8.5m/27′
Maximum optical axis height version 30′: 7.70m/25′
Maximum optical axis height version 37′: 9.40m/30′
Power IN: 220V/16A or 110V/16A
Power OUT for remote head: 30V/ 20A
Power OUT for monitor: 12V/ 3A
Maximum load capacity in under-slung version 30′: 70Kg/154lbs
Maximum load capacity in under-slung version 37′: 45Kg/99lbs
Maximum load capacity in over-slung on both versions: 30Kg/66lbs

 

Características

CHARACTERISTICS

  • Automatic compensator of the arc generated by the movement of the arm both horizontally and vertically.
  • Programmable limits on the telescopic movement of the arm.
  • Telescopic arm movement generator in relation to the horizontal or vertical movement of said arm.
  • Memorization of the arm movement.
  • Arm speed, adjustable, reported on screen.
  • Arm stop damping, adjustable, reported on screen.
  • Allows Under-slung and Over-slung mounting of the head.
  • Information on arm length, vertical and horizontal angle, and elevation of the optical axis, in meters and feet, on the screen.
  • Programmable sequential stops.
  • Tilt, Pan and Arm encoder reading for Motion Capture jobs.
  • Smooth arm movement in both high and low speed.
  • Sound reduction system in the movement of the telescopic arms.
  • 40 cm mechanical column lift.
  • 7 ‘arm to go from 30’ to 37 ‘. This arm is telescopic, so the measurements of the crane in its closed position do not vary.
Submit your review

Your email address will not be published.

Reviews

There are no reviews yet.

Manual scorpio 30+7

Download

Catalogue scorpio 30 + 7

Download

Menú

SCORPIO 30+7'

Add to Cart